[switcha]vlan 2
pcb和pcd同属于另一个vlan 3且能相互通信vlan配置显示动画
图5-5 vlan配置
[switcha-ethernet0/24]speed 100
对如图5-5所示vlan,要求pca和pcc同属于一个vlan 2且能相互通信两台s3026用两根100m网线通过trunk链路互连,并使用端口聚合功能增加链路带宽
[switcha-ethernet0/23]duplex full
[switcha-ethernet0/23]por老毛桃u盘装xp系统t trunk permit vlan 2 to 3
[switcha]link-aggregation ethernet 0/23 to ethernet 0/24 both
[switcha-ethernet0/24]port trunk permit vlan 2 to 3
[switcha-ethernet0/23]port link-type trunk
[switcha-vlan2]vlan 3
[switcha-ethernet0/24]port电脑店u盘装系统教程 link-type trunk
[switcha-vlan3]port ethernet 0/2
[switcha-ethernet0/24]duplex full
[switcha-vlan2]port ethernet 0/1
[switcha-ethernet0/23]speed 100
交换机vlan的设置视频
u盘装系统详细步骤 本文由www.upzxt.com整理!